There are many homeowners who do not realize that examining their attic and ensuring it is in good condition will have a positive impact on their overall comfort and energy bills. There are studies which have found that proper attic insulation will save approximately 20% to 50% on your heating bill. This will also help with the melting of snow in the winter which reduces the load on the roof. If you are going to insulate your roof, there are some steps you need to take.
Examine The Attic
The first step will be to examine your attic. While doing this, you will need to consider a few things. You will also need to understand the condition of your roof and the attic space. While inspecting the attic, you should look for any wet or damp spots that could be signs of moisture problems. If you find these areas, you will need to determine the cause and address this as soon as possible. You also need to inspect the rafter and ensure that they are not damaged or sagging.
Seal The Space
As you examine the attic, you need to consider if it is air sealed. Cracks and holes will need to be eliminated as they will make it impossible to maintain your desired temperature. If you are using foam spray installation, air sealing will be done automatically. You should also check that the roof and attic ventilation system is working correctly before insulating the area.
Choosing The Right insulation
There are a few factors to consider when choosing the right insulation for the attic. The R-value is the first and this is the heat resistance rating of the material. The higher the R-value rating, the better the insulation will generally be. Of course, this will vary depending on your location.
You also need to consider the area available. Effective insulation will depend on the space each material needs. The space you have for the insulation will need to be taken into account when you make your decision.
The last factor is the cost of the insulation. It is important that you choose insulation that suits your needs and does not break your budget.
Preparation Steps Before You Insulate
Once you have your insulation, you will need to take certain steps to ensure the insulation lasts for many years to come. The most important is to fix any leaks on the roof. These leaks can lead to the growth of mold which damages the insulation.
You also need to leave enough space between the insulation and light fixtures. This will keep your fire hazards to a minimum and the space should be around 3 to 5 inches. This prevents the fixtures from touching the insulation and setting it alight.
The last step will be to direct all your vents to the outside of your home. This will remove the humid air from the home and prevent the problems this can cause. Professional roofers at our location are waiting to help you with all your insulation needs. Contact us to get a quote!